plugins

Lists system settings plugin names separated by ','. These plugins are used to read and write system-wide connections. When multiple plugins are specified, the connections are read from all listed plugins. When writing connections, the plugins will be asked to save the connection in the order listed here; if the first plugin cannot write out that connection type (or can't write out any connections) the next plugin is tried, etc. If none of the plugins can save the connection, an error is returned to the user.

If NetworkManager defines a distro-specific network-configuration plugin for your system, then that will normally be listed here. (See below for the available plugins.) Note that the keyfile plugin is always appended to the end of this list (if it doesn't already appear earlier in the list), so if there is no distro-specific plugin for your system then you can leave this key unset and NetworkManager will fall back to using keyfile.

monitor-connection-files

Whether the configured settings plugin(s) should set up file monitors and immediately pick up changes made to connection files while NetworkManager is running. This is disabled by default; NetworkManager will only read the connection files at startup, and when explicitly requested via the ReloadConnections D-Bus call. If this key is set to 'true', then NetworkManager will reload connection files any time they changed. Automatic reloading is not advised because there are race conditions involved and it depends on the way how the editor updates the file. In some situations, NetworkManager might first delete and add the connection anew, instead of updating the existing one. Also, NetworkManager might pick up incomplete settings while the user is still editing the files.

auth-polkit

Whether the system uses PolicyKit for authorization. If false, all requests will be allowed. If true, non-root requests are authorized using PolicyKit. The default value is true.

dhcp

This key sets up what DHCP client NetworkManager will use. Allowed values are dhclient, dhcpcd, and internal. The dhclient and dhcpcd options require the indicated clients to be installed. The internal option uses a built-in DHCP client which is not currently as featureful as the external clients.

If this key is missing, it defaults to dhclient. It the chosen plugin is not available, clients are looked for in this order: dhclient, dhcpcd, internal.

no-auto-default

Specify devices for which NetworkManager shouldn't create default wired connection (Auto eth0). By default, NetworkManager creates a temporary wired connection for any Ethernet device that is managed and doesn't have a connection configured. List a device in this option to inhibit creating the default connection for the device. May have the special value * to apply to all devices.

When the default wired connection is deleted or saved to a new persistent connection by a plugin, the device is added to a list in the file /run/NetworkManager/no-auto-default.state to prevent creating the default connection for that device again.

See the section called “Device List Format” for the syntax how to specify a device.

Example:

no-auto-default=00:22:68:5c:5d:c4,00:1e:65:ff:aa:ee
no-auto-default=eth0,eth1
no-auto-default=*

ignore-carrier

This setting is deprecated for the per-device setting ignore-carrier which overwrites this setting if specified (See ignore-carrier). Otherwise, it is a list of matches to specify for which device carrier should be ignored. See the section called “Device List Format” for the syntax how to specify a device. Note that master types like bond, bridge, and team ignore carrier by default. You can however revert that default using the "except:" specifier (or better, use the per-device setting instead of the deprecated setting).

assume-ipv6ll-only

Specify devices for which NetworkManager will try to generate a connection based on initial configuration when the device only has an IPv6 link-local address.

See the section called “Device List Format” for the syntax how to specify a device.

configure-and-quit

When set to 'true', NetworkManager quits after performing initial network configuration but spawns small helpers to preserve DHCP leases and IPv6 addresses. This is useful in environments where network setup is more or less static or it is desirable to save process time but still handle some dynamic configurations. When this option is true, network configuration for WiFi, WWAN, Bluetooth, ADSL, and PPPoE interfaces cannot be preserved due to their use of external services, and these devices will be deconfigured when NetworkManager quits even though other interface's configuration may be preserved. Also, to preserve DHCP addresses the 'dhcp' option must be set to 'internal'. The default value of the 'configure-and-quit' option is 'false', meaning that NetworkManager will continue running after initial network configuration and continue responding to system and hardware events, D-Bus requests, and user commands.

hostname-mode

Set the management mode of the hostname. This parameter will affect only the transient hostname. If a valid static hostname is set, NetworkManager will skip the update of the hostname despite the value of this option. An hostname empty or equal to 'localhost', 'localhost6', 'localhost.localdomain' or 'localhost6.localdomain' is considered invalid.

default: NetworkManager will update the hostname with the one provided via DHCP on the main connection (the one with a default route). If not present, the hostname will be updated to the last one set outside NetworkManager. If it is not valid, NetworkManager will try to recover the hostname from the reverse lookup of the IP address of the main connection. If this fails too, the hostname will be set to 'localhost.localdomain'.

dhcp: NetworkManager will update the transient hostname only with information coming from DHCP. No fallback nor reverse lookup will be performed, but when the dhcp connection providing the hostname is deactivated, the hostname is reset to the last hostname set outside NetworkManager or 'localhost' if none valid is there.

none: NetworkManager will not manage the transient hostname and will never set it.

dns

Set the DNS (resolv.conf) processing mode. If the key is unspecified, default is used, unless /etc/resolv.conf is a symlink to /run/systemd/resolve/resolv.conf, /lib/systemd/resolv.conf or /usr/lib/systemd/resolv.conf. In that case, systemd-resolved is chosen automatically.

default: NetworkManager will update /etc/resolv.conf to reflect the nameservers provided by currently active connections.

dnsmasq: NetworkManager will run dnsmasq as a local caching nameserver, using a "split DNS" configuration if you are connected to a VPN, and then update resolv.conf to point to the local nameserver. It is possible to pass custom options to the dnsmasq instance by adding them to files in the "/etc/NetworkManager/dnsmasq.d/" directory. Note that when multiple upstream servers are available, dnsmasq will initially contact them in parallel and then use the fastest to respond, probing again other servers after some time. This behavior can be modified passing the 'all-servers' or 'strict-order' options to dnsmasq (see the manual page for more details).

unbound: NetworkManager will talk to unbound and dnssec-triggerd, providing a "split DNS" configuration with DNSSEC support. /etc/resolv.conf will be managed by dnssec-trigger daemon.

systemd-resolved: NetworkManager will push the DNS configuration to systemd-resolved

none: NetworkManager will not modify resolv.conf. This implies rc-manager unmanaged

rc-manager

Set the resolv.conf management mode. The default value depends on NetworkManager build options, and this version of NetworkManager was build with a default of "netconfig". Regardless of this setting, NetworkManager will always write resolv.conf to its runtime state directory /run/NetworkManager/resolv.conf.

symlink: If /etc/resolv.conf is a regular file, NetworkManager will replace the file on update. If /etc/resolv.conf is instead a symlink, NetworkManager will leave it alone. Unless the symlink points to the internal file /run/NetworkManager/resolv.conf, in which case the symlink will be updated to emit an inotify notification. This allows the user to conveniently instruct NetworkManager not to manage /etc/resolv.conf by replacing it with a symlink.

file: NetworkManager will write /etc/resolv.conf as file. If it finds a symlink, it will follow the symlink and update the target instead.

resolvconf: NetworkManager will run resolvconf to update the DNS configuration.

netconfig: NetworkManager will run netconfig to update the DNS configuration.

unmanaged: don't touch /etc/resolv.conf.

none: deprecated alias for symlink.

debug

Comma separated list of options to aid debugging. This value will be combined with the environment variable NM_DEBUG. Currently the following values are supported:

RLIMIT_CORE: set ulimit -c unlimited to write out core dumps. Beware, that a core dump can contain sensitive information such as passwords or configuration settings.

fatal-warnings: set g_log_set_always_fatal() to core dump on warning messages from glib. This is equivalent to the --g-fatal-warnings command line option.

autoconnect-retries-default

The number of times a connection activation should be automatically tried before switching to another one. This value applies only to connections that can auto-connect and have a connection.autoconnect-retries property set to -1. If not specified, connections will be tried 4 times. Setting this value to 1 means to try activation once, without retry.

slaves-order

This key specifies in which order slave connections are auto-activated on boot or when the master activates them. Allowed values are name (order connection by interface name, the default), or index (order slaves by their kernel index).

hostname

This key is deprecated and has no effect since the hostname is now stored in /etc/hostname or other system configuration files according to build options.

path

The location where keyfiles are read and stored. This defaults to "/etc/NetworkManager/system-connections".

unmanaged-devices

Set devices that should be ignored by NetworkManager.

See the section called “Device List Format” for the syntax how to specify a device.

Example:

unmanaged-devices=interface-name:em4
unmanaged-devices=mac:00:22:68:1c:59:b1;mac:00:1E:65:30:D1:C4;interface-name:eth2

managed

If set to true, then interfaces listed in /etc/network/interfaces are managed by NetworkManager. If set to false, then any interface listed in /etc/network/interfaces will be ignored by NetworkManager. Remember that NetworkManager controls the default route, so because the interface is ignored, NetworkManager may assign the default route to some other interface.

The default value is false.

level

The default logging verbosity level. One of OFF, ERR, WARN, INFO, DEBUG, TRACE. The ERR level logs only critical errors. WARN logs warnings that may reflect operation. INFO logs various informational messages that are useful for tracking state and operations. DEBUG enables verbose logging for debugging purposes. TRACE enables even more verbose logging then DEBUG level. Subsequent levels also log all messages from earlier levels; thus setting the log level to INFO also logs error and warning messages.

domains

The following log domains are available: PLATFORM, RFKILL, ETHER, WIFI, BT, MB, DHCP4, DHCP6, PPP, WIFI_SCAN, IP4, IP6, AUTOIP4, DNS, VPN, SHARING, SUPPLICANT, AGENTS, SETTINGS, SUSPEND, CORE, DEVICE, OLPC, WIMAX, INFINIBAND, FIREWALL, ADSL, BOND, VLAN, BRIDGE, DBUS_PROPS, TEAM, CONCHECK, DCB, DISPATCH, AUDIT, SYSTEMD, VPN_PLUGIN, PROXY.

In addition, these special domains can be used: NONE, ALL, DEFAULT, DHCP, IP.

You can specify per-domain log level overrides by adding a colon and a log level to any domain. E.g., "WIFI:DEBUG,WIFI_SCAN:OFF".

backend

The logging backend. Supported values are "debug", "syslog", "journal". "debug" uses syslog and logs to standard error. If NetworkManager is started in debug mode (--debug) this option is ignored and "debug" is always used. Otherwise, the default is "journal".

audit

Whether the audit records are delivered to auditd, the audit daemon. If false, audit records will be sent only to the NetworkManager logging system. If set to true, they will be also sent to auditd. The default value is false.

uri

The URI of a web page to periodically request when connectivity is being checked. This page should return the header "X-NetworkManager-Status" with a value of "online". Alternatively, it's body content should be set to "NetworkManager is online". The body content check can be controlled by the response option. If this option is blank or missing, connectivity checking is disabled.

interval

Specified in seconds; controls how often connectivity is checked when a network connection exists. If set to 0 connectivity checking is disabled. If missing, the default is 300 seconds.

response

If set controls what body content NetworkManager checks for when requesting the URI for connectivity checking. If missing, defaults to "NetworkManager is online"

searches

A list of search domains to be used during hostname lookup.

options

A list of of options to be passed to the hostname resolver.

servers

A list of addresses of DNS servers to be used for the given domain.

options

A list of domain-specific DNS options. Not used at the moment.

enable

Defaults to "true". If "false", the configuration file will be skipped during loading. Note that the main configuration file NetworkManager.conf cannot be disabled.

# always skip loading the config file
[.config]
enable=false

You can also match against the version of NetworkManager. For example the following are valid configurations:

# only load on version 1.0.6
[.config]
enable=nm-version:1.0.6

# load on all versions 1.0.x, but not 1.2.x
[.config]
enable=nm-version:1.0

# only load on versions >= 1.1.6. This does not match
# with version 1.2.0 or 1.4.4. Only the last digit is considered.
[.config]
enable=nm-version-min:1.1.6

# only load on versions >= 1.2. Contrary to the previous
# example, this also matches with 1.2.0, 1.2.10, 1.4.4, etc.
[.config]
enable=nm-version-min:1.2

# Match against the maximum allowed version. The example matches
# versions 1.2.0, 1.2.2, 1.2.4. Again, only the last version digit
# is allowed to be smaller. So this would not match match on 1.1.10.
[.config]
enable=nm-version-max:1.2.6

You can also match against the value of the environment variable NM_CONFIG_ENABLE_TAG, like:

# always skip loading the file when running NetworkManager with
# environment variable "NM_CONFIG_ENABLE_TAG=TAG1"
[.config]
enable=env:TAG1

More then one match can be specified. The configuration will be enabled if one of the predicates matches ("or"). The special prefix "except:" can be used to negate the match. Note that if one except-predicate matches, the entire configuration will be disabled. In other words, a except predicate always wins over other predicates.

# enable the configuration either when the environment variable
# is present or the version is at least 1.2.0.
[.config]
enable=env:TAG2,nm-version-min:1.2

# enable the configuration for version >= 1.2.0, but disable
# it when the environment variable is set to "TAG3"
[.config]
enable=except:env:TAG3,nm-version-min:1.2

# enable the configuration on >= 1.3, >= 1.2.6, and >= 1.0.16.
# Useful if a certain feature is only present since those releases.
[.config]
enable=nm-version-min:1.3,nm-version-min:1.2.6,nm-version-min:1.0.16

keyfile

The keyfile plugin is the generic plugin that supports all the connection types and capabilities that NetworkManager has. It writes files out in an .ini-style format in /etc/NetworkManager/system-connections.

The stored connection file may contain passwords, secrets and private keys in plain text, so it will be made readable only to root, and the plugin will ignore files that are readable or writable by any user or group other than root. See "Secret flag types" in nm-settings(5) for how to avoid storing passwords in plain text.

This plugin is always active, and will automatically be used to store any connections that aren't supported by any other active plugin.

ifcfg-rh

This plugin is used on the Fedora and Red Hat Enterprise Linux distributions to read and write configuration from the standard /etc/sysconfig/network-scripts/ifcfg-* files. It currently supports reading Ethernet, Wi-Fi, InfiniBand, VLAN, Bond, Bridge, and Team connections. Enabling ifcfg-rh implicitly enables ibft plugin, if it is available. This can be disabled by adding no-ibft.

ifcfg-suse

This plugin is deprecated and its selection has no effect. The keyfile plugin should be used instead.

ifupdown

This plugin is used on the Debian and Ubuntu distributions, and reads Ethernet and Wi-Fi connections from /etc/network/interfaces.

This plugin is read-only; any connections (of any type) added from within NetworkManager when you are using this plugin will be saved using the keyfile plugin instead.

ibft, no-ibft

This plugin allows to read iBFT configuration (iSCSI Boot Firmware Table). The configuration is read using /sbin/iscsiadm. Users are expected to configure iBFT connections via the firmware interfaces. If ibft support is available, it is automatically enabled after ifcfg-rh. This can be disabled by no-ibft. You can also explicitly specify ibft to load the plugin without ifcfg-rh or to change the plugin order.

Note that ibft plugin uses /sbin/iscsiadm and thus requires CAP_SYS_ADMIN capability.