Mandrakelinux

Conas é a cur ar do chóras

Required configuration

Installing Mandrakelinux is, in most cases, as simple as putting your Installation CD in your CDROM drive, and restarting your machine. Please refer to point 1.

NOTE:


Go bhunúsach tá ceithre bealaí gur féidir Mandrakelinux a cur ar do chóras, ba chóir iad a thriail in órd:

  1. Is féidir bootáil ón CD seo
  2. Make a boot floppy with Windows
  3. Other installation methods


1. Is féidir bootáil ón CD seo

Is féidir bootáil ón CD seo. Dé gnáth níl uait ach é a cur sa dlúthdhioscthiomant, agus an ríomhaire a aththosnú. Lean na treoir ar an scáilean agus beidh tú críochnaithe sar i bhfad.

NOTE:

On some laptops (portable computers), the system may not be able to boot from the CD. In such a case, you should prepare a boot floppy. See point 2 for details.

[top of this page]


2. Make a boot floppy with Windows

Más rud é nach féidir led' ríomhaire bootáil ón CD agus nár oibrigh na modhanna go dtí seo, beidh ort 'diosca bootála' a cruthú mar a leanas:

Le tosnú,

[top of this page]


3. Other installation methods

Muna bhfuil tú sásta na modhanna thuas a úsáid (ní thaitnaíonn comhéadan graifeach leat, teastaíonn uait é a dhéanamh thar líonra ...) beidh ort dhiosca bootála a cruthú.

is xxxxx.img an íomhá bootála

cdrom.img feistigh ó dhlúthdhiosca (CD-ROM)
hd_grub.img feistigh ó dhiosca crua (from a Linux, Windows, or ReiserFS filesystem)
you can configure it for your system at: http://qa.mandrakesoft.com/hd_grub.cgi
network.img feistigh thar ftp/nfs/http
NOTE: you will need to insert network_drivers.img in your floppy drive when prompted
pcmcia.img feistigh ó fearas PCMCIA (warning, most pcmcia network adapters are now directly supported from network.img)
hdcdrom_usb.img install from a hard-disk or a cdrom connected to USB

You may also burn boot.iso on a CDROM and boot from it. It supports all installations methods, cdrom, network, and hard-disk.

[top of this page]


Tacaíonn DrakX feistiú téacs-bunaithe. Lena úsáid, cló: text ag an líne syslinux. (I ndhiadh an lógó graifeach ag am bootáil).

Usáid an diosca feistigh chun an riomhaire a chuir ar siúl. Nuair is feidir, brú isteach rescue. Fan go dti go gcuireann sé ceist ort an diosca sábháil a cuir isteach.

Féach ar http://www.linux-mandrake.com/drakx/README do níos mó eolas teicniúil

[top of this page]


Below are the main stages of installation:

  1. Insert your Installation CDROM (or Installation Floppy disk if necessary) and restart your machine.
  2. Press [Enter] when the Mandrakelinux welcome screen appears and carefully follow the instructions.
  3. When the installation is complete take out the CD-ROM when ejected (and any floppy disk if present in drive); your machine will restart. If it does not, restart it manually.
  4. Mandrakelinux will start. After bootup, you can login on your machine under the user account setup during install, or as "root".

Nóta tabhachtach :

The "root" account will give you unrestricted access to your Linux system. Do not use it except to configure or administer Linux. For every day use, use a normal user account which you can configure with the "userdrake" tool, or with the commands "adduser" and "passwd".

Go n'eiri an bóthair leat le Mandrakelinux!

[top of this page]


Do cabhair feistiu, feach ar an Mandrakelinux diffusion list agus FAQ ar láthair Mandrakelinux ar an Idirlinn.